Zone Control Systems

Zone control service.

Do some areas of your West Jefferson, NC, home have inconsistent temperatures even as you adjust your home’s only thermostat? If so, then read on. You could most likely benefit from a zone control system.

A zone control system gives you control over the temperature in each room in your house using only single zone unitary HVAC equipment. The zone control system warms or cools the rooms you use the most at the time you use them. It works in tandem with your thermostat(s) to provide only the necessary heating or cooling energy each room in your home needs at the time. There are only a few required basic items to zone your home: thermostats, a control panel, and zone dampers in your ductwork. Although zoning doesn’t affect the efficiency of your heating and cooling system, a zone control does make the most efficient use of your system.

How Does It Work?

A zone control system uses thermostats to connect to a central control panel to open and shut dampers distributed throughout your ductwork, thus blocking or releasing hot or cold air. You set the temperature for each zone via each thermostat, and the zone control system does the rest of the work for you. There are many factors affecting the indoor temperature in your home, such as appliances, higher or cathedral ceilings, shading, wind chill, and cooking. Zoning solves these problems by allowing each zone’s thermostat to individually adjust to the desired heating or cooling level.

What Is a Zone?

A zone can be anything you design it to be: an entire floor of your house, a group of rooms, or just one room.

How Do I Know If I Need a Zone Control System?

Determining if you need a zone control system isn’t too tricky. We at Scott Brothers Heating & Air are happy to help you make that assessment. But to get started, if you can answer yes to one or more of the following conditions in your home, your home is more than likely a candidate. Does your home have:

  • More than one level or story?
  • A rambling floor plan that extends far beyond your main living space?
  • A concrete slab as your foundation?
  • Large glass windows?
  • Finished rooms in the attic or basement, or rooms over the garage?
  • Large open areas?

Answering yes to any of the above home conditions indicates you should call us at 336-877-1702 so one of our experienced technicians can talk with you about your options for a zone control system.

A wonderful characteristic of a zone control is you can begin your home with only one zone and then retrofit the application. Of course, you can always start a new home with a zone control system as well.

Benefits of a Zone Control System

The two biggest benefits of installing this kind of system are energy efficiency and money savings. Pairing a zone control system with a programmable or smart thermostat will give you more control over your home’s heating and cooling than you ever thought possible. No longer will you be overheating or overcooling areas in your home to accommodate the other too-warm or too-cool areas or because certain rooms aren’t used by anyone in your home at different times of the day. High energy efficiency is a guaranteed way to save money.

Another benefit, and perhaps the most gratifying benefit, of the system is the increased comfort you’ll feel in your home. Gone will be the days of hot or cold spots. Your home will be as you’ve always dreamed it should be––home sweet home. Give Scott Brothers Heating & Air a call today.

Zone Control System Installation in Fleetwood, NC 28626

“Chase and Jeremiah did a good job of replacing my thermostats and conducting the semi-annual system check. These are two great fellows.”
- Dan Z.

Zone Control System Maintenance in West Jefferson, NC 28694

“I met Luke for the first time today since he is a new employee who just finished school for this type of work. He is a personable young man who was polite and went about his work with no interruptions. At the completion of the job he informed us that all was well and if we had any questions or problems to just give the office a call.”

- Brian S.

Zone Control System Replacement in Boone, NC 28607

“Trey brought his endoscope camera to see how the dual zone dampers were cycling. Saved a lot of time plus didn’t have to tear the duct apart. Now I know why he catches all the fish.”

- N B.

Zone Control System Repair in Lansing, NC 28643

“Chad was on time, professional, and we created a strategy for fixing our problem.
Thank you.”

- Robert S.

Zone Control System Maintenance West Jefferson, NC 28694

Curtis is always thorough and professional

-John C.

Zone Control System Maintenance West Jefferson, NC 28694

This was our first time with Chase, what a fine young man, hard to believe he’s Randall’s son. In all seriousness, a typical fine, young Scott. Just adds to a great family. Haven’t met the black sheep yet.

-Harry S.

Zone Control System Repair in Boone, NC 28607

“Excellent explanation and service.”

– Rod S.

- Rod S.

Zone Control System Repair in Jefferson, NC 28640

“Curtis always does a great job. Very pleased with his service over the years.”

– Debbie J.

- Debbie J.

Zone Control System Maintenance in West Jefferson, NC 28694

“Chase arrived an hour ahead of the scheduled time and performed the spring maintenance as per our contract. He was personable, skilled in his tasks and prompt in completing the job. We have a lot of confidence in Scott Brothers and the staff they send to the job site.”

– Brian S.

- Brian S.

Zone Control System Repair in Fleetwood, NC 28626

“Well done…”

– Ken L.

- Ken L.

Need Zone Control Systems Service?

Contact the experts at Scott Brothers Heating & Air.

Call us at 336-877-1702!